by autoepcsoft4444@gmail.com | Jun 24, 2026 | Detroit Diesel
Diesel Oxidation Catalyst – Diesel Particulate Filter AdditionalRemoval Information The Diesel Oxidation Catalyst (DOC) – Diesel Particulate Filter (DPF) assembly can be removed independentlyfrom the Selective Catalytic Reduction (SCR Catalyst) section of...
by autoepcsoft4444@gmail.com | Jun 24, 2026 | Detroit Diesel
Install as follows: 1. Install new fuel compensation pressure sensor into doser block assembly using two bolts. Torque bolts to11 N·m (8 lb·ft).2. Install the hydrocarbon doser block assembly. Removal of the Selective Catalytic Reduction Inlet TemperatureSensor 1....
by autoepcsoft4444@gmail.com | Jun 24, 2026 | Detroit Diesel
Remove as follows: 1. Shut off engine and apply the parking brake, chock the wheels, and perform any other applicable safetysteps. 2. Disconnect the batteries.3. Remove the bolt (2) securing the sensor box cover and remove the cover (1).4. Disconnect the Diesel...
by autoepcsoft4444@gmail.com | Jun 24, 2026 | Detroit Diesel
Removal of the Diesel Oxidation Catalyst Inlet Pressure Sensor Remove as follows: 1. Shut off engine and apply the parking brake, chock the wheels, and perform any other applicable safetysteps. To avoid injury from electrical shock, use care when connecting battery...
by autoepcsoft4444@gmail.com | Jun 24, 2026 | Detroit Diesel
Description and Operation of the Two-BOX (2V2) AftertreatmentControl Module The Aftertreatment Control Module (ACM) controls all aftertreatment functions. It is mounted on the vehiclechassis in a protected area. Temperature, pressure, and NOx sensors connect to the...
by autoepcsoft4444@gmail.com | Jun 24, 2026 | Detroit Diesel
Installation as follows: NOTICEIf the Diesel Oxidation Catalyst (DOC) and/or the Diesel Particulate Filter (DPF) is replaced,all applicable fault code diagnostics should be completed and the root cause of the failuremust be repaired. Refer to the DDC-SVC-MAN-0208...
