by autoepcsoft4444@gmail.com | Jun 23, 2026 | Detroit Diesel
1. Apply high temp anti-seize to the threads of the sensor, but do not allow any to get on the sensor probe. 2. Install the Diesel Particulate Filter (DPF) outlet temperature sensor (1) to the 1-BOX™ configuration.Torque to 35-38 N·m (26-28 lb·ft) 3. Connect the DPF...
by autoepcsoft4444@gmail.com | Jun 23, 2026 | Detroit Diesel
1. Apply high temp anti-seize to the threads of the sensor, but do not allow any to get on the sensor probe.2. Install the Diesel Oxidation Catalyst (DOC) inlet temperature sensor (2) to the 1-BOX™. Torque to 35-38N·m (26-28 lb·ft). 3. Connect the DOC inlet...
by autoepcsoft4444@gmail.com | Jun 23, 2026 | Detroit Diesel
1. Shut off engine and apply the parking brake, chock the wheels, and perform any other applicable safetysteps. 2. Disconnect the batteries. Refer to OEM procedures.3. If necessary, remove the passenger side fairing. Refer to OEM procedures.4. Remove the Diesel...
by autoepcsoft4444@gmail.com | Jun 23, 2026 | Detroit Diesel
BOX™ Aftertreatment Device Sensor Locations 1. Exhaust Outlet2. Selective Catalytic Reduction (SCR Catalyst) Outlet NOx sensor3. Selective Catalytic Reduction (SCR Catalyst) Outlet Temperature Sensor4. Soot Sensor5. 18-Pin Electrical Connectors6. Exhaust Inlet7....
by autoepcsoft4444@gmail.com | Jun 23, 2026 | Detroit Diesel
Removal of the 1-BOX™ Aftertreatment Harness Remove as follows: 1. Shut off the engine, apply the parking brake, chock the wheels, and perform any other applicable safetysteps. 2. Disconnect the batteries. Refer to OEM procedures.3. If necessary, remove the passenger...
by autoepcsoft4444@gmail.com | Jun 23, 2026 | Detroit Diesel
Description and Operation of the 1-BOX™ Aftertreatment ContolModule The Aftertreatment Control Module (ACM) controls all aftertreatment functions. It is mounted on the 1-BOX™configuration. Temperature, pressure, and NOx sensors connect to the ACM in addition to...
